AT-FY22 · Basic electronics
Digital Dice Using LEDs
Press a button and seven LEDs show a random number from 1 to 6, like a real dice.
- Suits
- Sem 1–4
- Branches
- ECE, EEE, CSE, ISE, AIML, Mechatronics
- Type
- Hardware model
How it works
A 555 timer produces very fast pulses while the button is held down. These pulses go to a CD4017 counter IC, which is wired to count only six steps and then start again. Diodes connect each step to the right combination of seven LEDs arranged like the dots on a dice. Because the count is far too fast to follow, the number it stops on when you release the button is random.
What it does
- Random result every press
- Dice-pattern LEDs
- No programming needed
Main parts
555 timer, CD4017, LEDs
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY01Automatic Street Light Using LDRStreet lights on a road model switch on at dusk and off at dawn on their own, so no power is wasted in daylight.
- AT-FY02Water Tank Overflow AlarmLEDs show how full the tank is and a buzzer sounds just before it overflows.
- AT-FY03Rain Alert for Drying ClothesA rain sensor on the terrace sounds a buzzer inside the house the moment the first drops fall.
- AT-FY04Smart Dustbin with Automatic LidThe lid opens when a hand comes near and closes by itself, so nobody touches a dirty bin.