AT-ME07 · Automation
Pick and Place Robotic Arm
A servo arm picks objects and places them at set positions, by buttons or a saved sequence.
- Suits
- Sem 5–8
- Branches
- Mechatronics, ECE
- Type
- Hardware model
How it works
The arm has servo motors at the base, shoulder, elbow and gripper. Each one is moved with buttons or knobs to take the arm to a position. In record mode the controller saves every position in order. In replay mode it runs through the saved positions and repeats the pick and place action on its own.
What it does
- Four-axis arm
- Record and replay
- Gripper control
Main parts
Servo motors, controller, arm frame
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-EL12Smart Water Pump ControllerRuns the pump by tank level and cuts it off if the sump is dry, to protect the motor.
- AT-EC28Smart Ration Dispensing SystemIdentifies the card holder and dispenses the exact quantity of grain, with every issue recorded.
- AT-EE15Smart Home Energy ManagementControl appliances, track their energy use and set schedules from a phone.
- AT-EE17Smart Street Light with Fault DetectionLights switch on at night, dim when the road is empty and report a failed lamp.