AT-ME13 · Automation
Temperature-Based Fan Speed Control
Fan speed rises and falls with room temperature.
- Suits
- Sem 5–6
- Branches
- Mechatronics, ECE
- Type
- Hardware model
How it works
A temperature sensor measures the room temperature and the Arduino shows it on the display. Below the lower set point the fan stays off. As the temperature rises above it, the Arduino increases the PWM to the fan through the motor driver, so the speed goes up in proportion, reaching full speed at the upper set point.
What it does
- Automatic speed
- Temperature on display
- Set points
Main parts
Arduino, temperature sensor, motor driver
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-EL12Smart Water Pump ControllerRuns the pump by tank level and cuts it off if the sump is dry, to protect the motor.
- AT-EC28Smart Ration Dispensing SystemIdentifies the card holder and dispenses the exact quantity of grain, with every issue recorded.
- AT-EE15Smart Home Energy ManagementControl appliances, track their energy use and set schedules from a phone.
- AT-EE17Smart Street Light with Fault DetectionLights switch on at night, dim when the road is empty and report a failed lamp.