AT-EL02 · Electrical machines
DC Motor Direction Control
Run a DC motor forward, reverse or stop with push buttons using relay switching.
- Suits
- Sem 3–4
- Branches
- EEE, Mechatronics
- Type
- Hardware model
How it works
Two relays are connected so that one applies the supply to the motor one way round and the other reverses it, which reverses the rotation. The forward and reverse buttons each operate one relay. The relays are interlocked, so if one is on the other cannot switch on, which prevents a short circuit. A stop button releases both, and LEDs show the direction.
What it does
- Forward and reverse
- Interlocked relays
- Indicator LEDs
Main parts
Relays, push buttons, DC motor
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-EL01DC Motor Speed Control Using PWMTurn a knob to change the speed of a DC motor smoothly from stop to full speed.
- AT-EL03Closed-Loop Motor Speed Control with RPM DisplayThe controller holds the set speed even when the load changes and shows live RPM.
- AT-EL04Star-Delta Starter ModelShows how a motor starts in star and shifts to delta after a set time, using relays and a timer.
- AT-EL07Stepper Motor Position ControlEnter an angle on the keypad and the stepper motor turns exactly to that position.