AT-BE25 · Vehicle safety
Alcohol Detection and Engine Lock
The engine motor starts only if no alcohol is found in the driver's breath, and locks with an alarm if it is.
- Suits
- Sem 3–6
- Branches
- ECE, EEE, Mechatronics
- Type
- Hardware model
How it works
The MQ-3 sensor near the driver's seat responds to alcohol vapour in the breath, and its output rises with the amount present. The Arduino reads the sensor before and during driving. If the reading is normal, the throttle switch starts the motor that stands for the engine. If alcohol is detected, the relay cuts the motor, the buzzer sounds and the LCD shows the warning until the reading clears.
What it does
- MQ-3 breath sensing
- Throttle switch
- Engine lock with buzzer and LCD
Main parts
Arduino, MQ-3 sensor, relay, DC motor, LCD
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY13Bike Side-Stand Warning SystemA buzzer and light warn the rider if the bike starts moving with the side stand still down.
- AT-EC05Smart Helmet for Bike SafetyThe bike starts only when the helmet is worn, and an alert goes out if a crash is detected.
- AT-EC06Vehicle Overspeed Alert SystemMeasures wheel speed and warns the driver when it crosses the limit.
- AT-EC07Automatic Braking with Obstacle DetectionA model vehicle slows and stops by itself when an obstacle comes too close.