AT-EC07 · Vehicle safety
Automatic Braking with Obstacle Detection
A model vehicle slows and stops by itself when an obstacle comes too close.
- Suits
- Sem 5–8
- Branches
- ECE, Mechatronics
- Type
- Hardware model
How it works
An ultrasonic sensor at the front of the model vehicle keeps measuring the distance to whatever is ahead. The Arduino controls the drive motors through a motor driver. At a safe distance the vehicle runs at normal speed. As the gap closes it gives a warning and reduces the motor speed in steps, and at the minimum distance it stops completely.
What it does
- Distance-based braking
- Warning before stop
- Speed display
Main parts
Arduino, ultrasonic sensor, motor driver
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY13Bike Side-Stand Warning SystemA buzzer and light warn the rider if the bike starts moving with the side stand still down.
- AT-BE25Alcohol Detection and Engine LockThe engine motor starts only if no alcohol is found in the driver's breath, and locks with an alarm if it is.
- AT-EC05Smart Helmet for Bike SafetyThe bike starts only when the helmet is worn, and an alert goes out if a crash is detected.
- AT-EC06Vehicle Overspeed Alert SystemMeasures wheel speed and warns the driver when it crosses the limit.