AT-FY13 · Vehicle safety
Bike Side-Stand Warning System
A buzzer and light warn the rider if the bike starts moving with the side stand still down.
- Suits
- Sem 1–4
- Branches
- ECE, EEE, CSE, ISE, AIML, Mechatronics
- Type
- Hardware model
How it works
A limit switch is fixed at the stand so that it is pressed only when the stand is down. This switch is wired in the path of a relay along with the ignition switch of the model. When the bike is switched on while the stand is still down, the relay picks up and drives the buzzer and a warning LED. Lifting the stand releases the switch and the warning stops.
What it does
- Stand position switch
- Warning buzzer and LED
- Simple to fit on a model
Main parts
Limit switch, relay, buzzer, LED
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-BE25Alcohol Detection and Engine LockThe engine motor starts only if no alcohol is found in the driver's breath, and locks with an alarm if it is.
- AT-EC05Smart Helmet for Bike SafetyThe bike starts only when the helmet is worn, and an alert goes out if a crash is detected.
- AT-EC06Vehicle Overspeed Alert SystemMeasures wheel speed and warns the driver when it crosses the limit.
- AT-EC07Automatic Braking with Obstacle DetectionA model vehicle slows and stops by itself when an obstacle comes too close.