AT-FY08 · Arduino
Smart Parking Assistant
Green, yellow and red lights tell the driver how close the car is to the wall, with a buzzer at the stop point.
- Suits
- Sem 1–4
- Branches
- ECE, EEE, CSE, ISE, AIML, Mechatronics
- Type
- Hardware model
How it works
An ultrasonic sensor fixed on the wall measures the distance to the car by timing the echo of a sound pulse. The Arduino converts this into centimetres and compares it with three zones. A green light means there is plenty of room, yellow means slow down, and red with a buzzer means stop. The driver simply watches the lights while reversing, exactly like a parking sensor in a car.
What it does
- Distance in cm
- Three-colour guide lights
- Stop buzzer
Main parts
Arduino, ultrasonic sensor, LEDs, buzzer
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY04Smart Dustbin with Automatic LidThe lid opens when a hand comes near and closes by itself, so nobody touches a dirty bin.
- AT-FY05Automatic Hand Sanitizer DispenserHold a hand under the nozzle and a small pump gives a measured amount of sanitizer without any contact.
- AT-FY06Automatic Plant Watering SystemA soil moisture sensor switches the pump on when the soil is dry and off when it is wet enough.
- AT-FY21Traffic Light ControllerRed, yellow and green lights run in a timed sequence for a junction, with a button for pedestrians to cross.