AT-BE11 · Arduino
Ultrasonic Distance Meter
Measures the distance to any object without touching it and shows it in centimetres.
- Suits
- Sem 3–4
- Branches
- ECE, EEE, Mechatronics
- Type
- Hardware model
How it works
The sensor sends a short burst of ultrasound and listens for the echo. The Arduino measures the time between the two, and since the speed of sound is known, calculates the distance and shows it in centimetres on the LCD. The reading updates several times a second, and a buzzer sounds when the object is closer than the set distance.
What it does
- 2 cm to 4 m range
- LCD readout
- Buzzer for near objects
Main parts
Arduino, ultrasonic sensor, LCD
What you get
- Working model, tested before dispatch
- Program code and wiring details
- Rough report and explanation of the working
- Live demo on video call before the final payment
Good to know
- This is a table-top demonstration model on low voltage, not a full-size product.
- Features are as listed here. Anything extra is quoted separately.
- Shipping is charged at the actual courier rate.
- Full reports and PPTs are not included.
Similar projects
- AT-FY04Smart Dustbin with Automatic LidThe lid opens when a hand comes near and closes by itself, so nobody touches a dirty bin.
- AT-FY05Automatic Hand Sanitizer DispenserHold a hand under the nozzle and a small pump gives a measured amount of sanitizer without any contact.
- AT-FY06Automatic Plant Watering SystemA soil moisture sensor switches the pump on when the soil is dry and off when it is wet enough.
- AT-FY08Smart Parking AssistantGreen, yellow and red lights tell the driver how close the car is to the wall, with a buzzer at the stop point.